0086-571-88220971 [email protected]
0 Items

DC MOTOR PUMP GROUP 1
Common Description
Consisting of a hefty duty DC motor plus the CB1S gear pump, this pump motor group is definitely an best hydraulic power unit for mobile hydraulic equipments, such as auto carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP 2
General Description
This motor pump includes four.5″ DC motor, a CBSR gear pump with built-in relief valve and test valve.
DC MOTOR PUMP GROUP 3
Standard Description
This motor pump includes a 4.5″ DC motor as well as a CBSR gear pump which has a normal power up/gravity down circuit which has a relief valve, a check valve in addition to a solenoid release valve.
Particular Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean the many hydraulic parts concerned before mounting the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities. N46 hydraulic oil is encouraged.
four. The power unit needs to be mounted horizontally.
five. The relief valve pressure is preset about 25% larger than the working pressure.
6. Flow control valve for lowing speed adjustment is obtainable unpon request.