0086-571-88220971 [email protected]
0 Items

The EP Greenhouse Gearbox is a concise and lightweight reduction gearbox with an integrated limit switch system that is ideal for assembly of a locally available electric engine. The Gearbox is utilized in manually-managed or climate-controlled ventilation and screen systems in greenhouses. The quick and easy-to-installEP Gearbox is usually rainproof and windproof. The Gearbox has a high protection class (IP65) and can be used within an ambient temperature of 0-60 °C.

The low-noise Gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel tranny means that the drive shaft is certainly locked when the reduction gearbox is not running. The fully sealed reduction gearbox has an growth chamber with a diaphragm to keep carefully the gear essential oil at a low pressure under all circumstances, even at high temperatures. Thanks to the use of an expansion chamber, the Gearbox can be installed in any position. There are no restrictions, because there is no need for a bleed connect. The sealed reduction gearbox keeps the apparatus oil of the Gearbox in ideal condition because of its entire operating lifetime. The Gearbox is ideal for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.

THE APPARATUS box reduction gearbox has an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed in an built-in chamber and is definitely enclosed by an impact-resistant plastic-type material cover. The limit switch system is accessible and simple to adjust. The limit change system’s optimum switching range is 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The Gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and gear reduction motor fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 moments.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).