0086-571-88220971 [email protected]
0 Items

Higher electrical power roller chains with improved fatigue power and impact strength
HI-PWR-S roller chains are enhanced in fatigue power and effect strength with no shifting the dimension during the pin length route of regular roller chains. Plates are enlarged, as well as the machining accuracy and assembling accuracy of elements are improved. The roller chains hold large transmission efficiency for applications from very low to high speeds and are impressive enough to withstand long-term use.
Advised utilizes
?In contrast to normal roller chains, HI-PWR-S roller chains are increased in maximum kilowatt rating by about thirty % inside a medium to reduced velocity variety. They exhibit outstanding capability in spots the place big shock loads are utilized, drive units for frequent start/stop, and also in large velocity applications.

?Civil engineering machines this kind of as skid steer, trenchers, trucks, cranes, agitating trucks, forklifts and drive units for conveyors, elevators, stackers, and so on.
Variety of chains
Normally, decide on your chain with reference to “Designing of Chain Transmission” and also on the tables of “Drive Performance” and “Dimensions” of HI-PWR-S kind roller chains.Even so, only to get a exclusive case of very low pace and significantly less shock, “Low-speed selection” can be applicable.
HI-PWR-S Roller chains and ANSI typical chains are the exact same in standard dimensions. Use ANSI typical sprockets.
Connecting back links and offset back links
Use H connecting hyperlinks for HI-PWR-S. In an H connecting hyperlink, the pins are lightly interference-fitted together with the connecting plate. For that connection amongst the connecting plate plus the connecting pins, spring pins are used rather than cotter pins for a common roller chain.
The center plates of an H connecting hyperlink for multiplex chain has bushings pressed in.
HI-PWR-S roller chains tend not to have any offset hyperlink. Use an even variety of hyperlinks.
In no way make the holes on the connecting plate more substantial and in no way make the pins thinner to facilitate the perform for fitting the pins to the connecting plate, considering that otherwise the fatigue power will likely be lowered.