Split gearing, another method, consists of two ギア halves positioned side-by-side. Half is fixed to a shaft while springs cause the other half to rotate somewhat. This escalates the effective tooth thickness so that it completely fills the tooth space of the mating gear, thereby eliminating backlash. In another edition, an assembler bolts the rotated fifty percent to the fixed half after assembly. Split gearing is normally found in light-load, low-speed applications.
Fixed assemblies are usually found in 
heavyload applications where reducers must reverse their direction of rotation (bi-directional). Though “set,” they may still require readjusting during provider to pay for tooth use. Bevel, spur, helical, and worm gears lend themselves to set applications. Spring-loaded assemblies, however, maintain a constant zero backlash and tend to be used for low-torque applications.
Common design methods include brief center distance, spring-loaded split gears, plastic material fillers, tapered gears, zero backlash gearbox preloaded gear trains, and dual path gear trains.
Precision reducers typically limit backlash to about 2 deg and are used in applications such as instrumentation. Higher precision systems that obtain near-zero backlash are used in applications such as for example robotic systems and machine device spindles.
Gear designs can be modified in many ways to cut backlash. Some strategies adjust the gears to a established tooth clearance during initial assembly. With this approach, backlash eventually increases due to wear, which needs readjustment. Other designs use springs to carry meshing gears at a constant backlash level throughout their assistance lifestyle. They're generally limited by light load applications, though.
JA 
EN 
ES 
PT 
AR 
ID 
KO 
IT 
DE 
ZH 
RU 
BG 
FR 
ZH-TW