0086-571-88220971 [email protected]
0 Items

This Ruland setscrew shaft collar is constructed of aluminum. It really is a setscrew-type shaft collar for applications assisting low axial loads and basic positioning. Setscrew collars possess improved keeping power when the shaft materials is softer than the setscrew material. It really is manufactured from aluminum for resistance to corrosion and tarnishing and is usually lightweight for make use of in applications where material weight is a thought. This collar includes a forged setscrew for securing the collar onto the shaft. The operating temperatures for this collar range between -40 to 107 degrees C (-40 to 225 degrees F). This shaft collar is suitable for use in various applications, which includes in the auto industry to situate elements in car power steering assemblies, the production industry to locate elements on a conveyor belt system, and the hobby craft sector to hold wheels on axles in remote control vehicles, among others.
Shaft collars are ring-shaped devices primarily used to secure parts onto shafts. In addition they provide as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece styles, and setscrew collars. In both types, a number of screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press straight against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and will be installed between elements on the shaft. Shaft collars are produced from an array of materials including zinc-plated steel, light weight aluminum, nylon, and neoprene. Within nearly all sorts of machinery and market, shaft collars are found in applications which includes gearbox assemblies, motor bases, machine equipment, drive shafts, agricultural implements, medical apparatus, and paper and steel mill equipment, amongst others.
Ruland manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The business, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) standards.
· Setscrew shaft collar for applications supporting low axial loads and basic positioning
· Effective on shafts manufactured from softer material than the setscrew material
· Light weight aluminum for resisting corrosion and tarnishing
· Includes a forged setscrew for securing the collar onto the shaft
· Operating temperatures range between -40 to 107 degrees C (-40 to 225 degrees F)

When you need to displace your existing flagpole flash collar this 2 piece collar makes installation easy. You don’t need to remove the pole or to go over the top of the pole. This 2 piece cast light weight aluminum collar includes a hidden hinge underneath the collar therefore no rivets or screws are because.
The heavy-duty 2 piece Cast Aluminum Collars is the many durable collar offered in the industry today! Cast from Light weight aluminum Alloy, these 1/4″ thick cast collars are created to withstand the harshest of environments. replacement or addition to a preexisting flagpole.
I.D. approximately 1/8″ wider than Butt Diameter.
Light weight aluminum Decorative Pipe Collar – 5 inch Gas Type: Gas, Liquid Propane. Internal Diameter: 5″. Width: 10.625″. Double Wall Structure. UL Detailed. This Decorative Pipe Collar for 5 ” Type B Pipe from the Round Gas Vent series is usually a sort B gas component and contains the duralock program for a good seal. This pipe collar is an optional accessory. It is to be utilized for decorative reasons. EPT Type B Gas Vent is made to meet the rugged needs of the work site. The inner wall is recessed to remove damage in managing. EPT’s innovative system for a lock-limited connection for Type B Gas Vent called DuraLock. Start to see the alignment indicators meet; feel the ends grasp with each other; hear the snap because the bond firmly locks into place. Type B gas vents are not suitable for use with wood-burning up or coal applications, industrial ovens, exhaust ranges and hoods, grease or pollution ducting, or as free-standing up exhaust vents for high temperature applications. Type B Gas Vent provides been engineered to warmth up quickly. It remains hot through the operation of the applying with minimal condensation in the applying and vent program. Pipe lengths are available in multiple lengths, 6 to 60 in ., with a full enhance of adjustable and rigid fittings. Searching for Simpson Dura-Vent? You discovered it! Simpson Dura-Vent has changed their name to EPT. EPT is an established technological head in the venting industry. Consistently the first ever to market with new improvements in venting systems, EPT has captured a leadership placement in emerging marketplaces. EPT offers patents for several products and continues to design secure and technologically advanced venting. The business’s research into solving problems with corrosion, when biofuels such as for example corn are used, led to the break-through patent for PelletVent Pro. Scientifically proven materials and unequalled engineering make EPT products not only the best option, or safest choice, however the only choice for professional quality venting products.
When you need to displace your existing flagpole flash collar this 2 piece collar makes installation easy. No need to remove the pole or even to go over the top of the pole. This 2 piece cast light weight aluminum collar includes a hidden hinge underneath the collar so no rivets or screws are in view.
The heavy-duty 2 piece Cast Aluminum Collars may be the many durable collar offered on the market today! Cast from Light weight aluminum Alloy, these 1/4″ heavy cast collars are made to withstand the harshest of conditions. replacement or addition to a preexisting flagpole.
Our spun aluminium flash collar can be an ornamental covering that provides a finished turn to underneath of the flagpole. It also conceals and helps secure your ground sleeve from the components. Prices proven below are for the typical bright satin finish. Our flash collars are also obtainable in anodized and various other finishes upon demand. Please call for availability and pricing.
The Design B Spun Collar is our most popular design flash collar for shoe foundation flagpoles and is manufactured to exacting specs from the highest quality components. This flash collar supplies the perfect finishing touch for your flagpole. For Use With Shoe Bottom Flagpole Applications