Gear Boxes For Rotary Cutter’s, Shredders, and Choppers
RC 30 Series Gearbox, 40hp Rated, 1-3/8″ SB enter, 1-one/2″ X twelve Spline Output. 1:one.47 Ratio Exchange your broken rotary cutter gearbox with this replacement unit. Why rebuild when you can change at this kind of a minimal price tag? These gearboxes have been used by Worksaver, HawkLine, Worldwide, WAC, Large Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and numerous far more. Observe: Real Gearbox might have a rounded housing or square as shown, dependent on existing availability, all inside parts are interchangeable and specifications for both boxes are identical! This gearbox characteristics a one:1.47 Velocity Up equipment ratio for use on 5′ and larger diameter rotary cutters. Industry standard one-3/eight” clean diameter input shaft with 1/two” shear bolt hole and retaining ring groove and 1.fifty seven” diameter 12 tapered spline output shaft permit fitment to most light, standard and medium responsibility rotary cutters. Every single gearbox attributes large velocity ball bearing units and warmth handled gears and shafts to guarantee long lifestyle. Four bolt mounting matches industry expectations. Every gearbox includes blade provider mounting nut and cotter pin. Gearboxes are delivered dry and demand sixteen ounces of eighty-90W gearlube or equal. Disclaimer: Any and all Original Equipment Manufacturer’s (OEM) tradenames, emblems, drawings, shades, descriptive data and component quantities are utilized for areas identification functions only, and DN Tools, LLC (DN) is in no way implying that any distinct parts are OEM areas. Additional, any use of the OEM’s tradenames, emblems, drawings or component numbers by DN is developed only to aid DN’s buyers, in obtaining the appropriate DN part or ingredient which will change the OEM’s component.
rotary cutter gearbox
Gearboxes function to administer a transfer of speed and torque by means of their inner equipment rotation, aiding the general performance of your rotary cutter. This RW-710-6S gearbox operates at seventy five-90 HP. The housing is built from sturdy ductile iron and the enter shaft actions 1-3/eight in., with 6 splines. It has a equipment ratio measuring 1:1.46, and is developed for use with 5 ft., 6 ft., and seven ft. rotary cutters. Much more dimension and much more HP method remember to speak to us for particulars.