0086-571-88220971 [email protected]
0 Items

Small Precison Worm Decrease Gearboxes
There are many of specifications you will have to consider when making a worm gearbox selection.
First, what’s the input and output torque requirements? Next, verify vendor horsepower/torque charts and select the correct worm equipment reducer.
If the size of the gearbox will be an important consideration after that check the reducer dimension specs, not all manufacturers make compact units. Actually, working with the proper supplier will help you not only find the right equipment reducer but also avoid some of the most typical errors in reducer selection. We offer a free guide to assist you find the appropriate supplier to utilize.
For low and fractional horsepower application you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between both of these models. Both feature either a hollow or solid result shaft. Both models are compact and offer users a wide variety of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your unique application or task is essential to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is necessary. This right angle gear motor is indeed versatile it can work just about anywhere.
Features & Options
Double Shaft or Single Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power provides designed and built exclusive, high accuracy mini gearboxes that cannot be found somewhere else. Our miniature gearboxes can be found in numerous configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that are designed and created to meet your specific specifications.
Contact us for the mini gearbox the application requires, or request a quote on a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, velocity reducers, equipment drives, and gearmotors. All conditions can be used more or less interchangeably. Please be aware that the links for our little gear drives include information on the full selection of framework sizes for that series or style.
Bevel Box Micro Equipment Drive
Our bevel box miniature equipment drives are app rated for the the best balance of functionality and cost. Torque can be balanced to meet your RPM and operating life requirements. Lightweight with low backlash functionality (as little as 1°, with choice of 1/2”).
Output torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a concise package. They provide an result shaft at 90° from the input, and are obtainable in gear ratios from 1:1 to 40:1. Lightweight but durable, with machined light weight aluminum housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single insight shaft that protrudes from opposite sides of the housing; output is definitely a keyed bore. Standard solitary- and double-end shafts are available and given keys and retainer rings. An array of gear ratios and insight sizes are available to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature small worm gearbox 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and permanent lubrication. They offer two input shafts on opposing sides of the framework, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm equipment drives deliver high efficiency overall performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes generate an output at 90° from the insight. They deliver superior efficiency in an amazing array applications and are constructed with small footprints, making them well suited for procedures where space is bound. They offer high efficiency with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and are rated for boosts to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes difficult and corrosion resistant, for your many demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm equipment reducers deliver excellent performance with high efficiency, and show rugged structure for challenging power transfer procedures. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are designed in extremely small footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a customized miniature gearbox to meet your unique specifications. We can produce custom micro gearboxes in virtually any configuration your application requires, with output torque amounts as high as 900Nm. We are able to work from your gearbox designs, reverse engineer a preexisting unit, or help you develop an all-new style that delivers the performance you will need. Ask for a quote on a custom made miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and unique ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and result shafts with drive essential and retainer rings could be supplied to your specs for any of our hollow bore miniature gearboxes. We offer a basic selection of one ended or dual ended shafts to assemble in these gearboxes. All gearbox shafts are given keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For E series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our app engineers to go over your particular needs.
We provide a broad selection of misalignment shaft couplings in ” and metric bore sizes. ” and metric precision ground shafts can be found from stock.
Contact Us for High Performance Miniature Gearboxes
We are the miniature gearbox experts. All of our micro gear drive versions deliver superior efficiency in a small footprint, and are rugged enough for challenging work environments. E mail us to learn more about our mini gearboxes, or demand a quote on a custom model that’s tailored to your preferences.
Additional benefits of worm drive gearboxes include: